Merge branch '29951-support-new-issue-creation-by-email-without-subaddressing-docs' into 'master'

Document new incoming email address format

See merge request gitlab-org/gitlab-ce!23991

doc/administration/incoming_email.md

@@ -13,43 +13,45 @@ GitLab has several features based on receiving incoming emails:
 ## Requirements
-Handling incoming emails requires an [IMAP]-enabled email account. GitLab
-requires one of the following three strategies:
-- Email sub-addressing
-- Dedicated email address
+Handling incoming emails requires an [IMAP](https://en.wikipedia.org/wiki/Internet_Message_Access_Protocol)-enabled
+email account. GitLab requires one of the following three strategies:
+- Email sub-addressing (recommended)
 - Catch-all mailbox
+- Dedicated email address (supports Reply by Email only)
 Let's walk through each of these options.
-**If your provider or server supports email sub-addressing, we recommend using it.
-Most features (other than reply by email) only work with sub-addressing.**
-
-[IMAP]: https://en.wikipedia.org/wiki/Internet_Message_Access_Protocol
-
 ### Email sub-addressing
 [Sub-addressing](https://en.wikipedia.org/wiki/Email_address#Sub-addressing) is
-a feature where any email to `user+some_arbitrary_tag@example.com` will end up
-in the mailbox for `user@example.com`, and is supported by providers such as
-Gmail, Google Apps, Yahoo! Mail, Outlook.com and iCloud, as well as the
-[Postfix mail server] which you can run on-premises.
-
-[Postfix mail server]: reply_by_email_postfix_setup.md
-### Dedicated email address
-This solution is really simple to set up: you just have to create an email
-address dedicated to receive your users' replies to GitLab notifications.
-### Catch-all mailbox
-A [catch-all mailbox](https://en.wikipedia.org/wiki/Catch-all) for a domain will
-"catch all" the emails addressed to the domain that do not exist in the mail
-server.
-GitLab can be set up to allow users to comment on issues and merge requests by
-replying to notification emails.
+a mail server feature where any email to `user+arbitrary_tag@example.com` will end up
+in the mailbox for `user@example.com` . It is supported by providers such as
+Gmail, Google Apps, Yahoo! Mail, Outlook.com, and iCloud, as well as the
+[Postfix mail server](reply_by_email_postfix_setup.md), which you can run on-premises.
+
+TIP: **Tip:**
+If your provider or server supports email sub-addressing, we recommend using it.
+A dedicated email address only supports Reply by Email functionality.
+A catch-all mailbox supports the same features as sub-addressing as of GitLab 11.7,
+but sub-addressing is still preferred because only one email address is used,
+leaving a catch-all available for other purposes beyond GitLab.
+### Catch-all mailbox
+A [catch-all mailbox](https://en.wikipedia.org/wiki/Catch-all) for a domain
+receives all emails addressed to the domain that do not match any addresses that
+exist on the mail server.
+As of GitLab 11.7, catch-all mailboxes support the same features as
+email sub-addressing, but email sub-addressing remains our recommendation so that you
+can reserve your catch-all mailbox for other purposes.
+### Dedicated email address
+This solution is relatively simple to set up: you just need to create an email
+address dedicated to receive your users' replies to GitLab notifications. However,
+this method only supports replies, and not the other features of [incoming email](#incoming-email).
 ## Set it up
@@ -160,14 +162,16 @@ for a real-world example of this exploit.
     gitlab_rails['incoming_email_idle_timeout'] = 60
     ```
-    Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes
-    mailbox incoming@exchange.example.com
+    Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes the
+    catch-all mailbox incoming@exchange.example.com
     ```ruby
     gitlab_rails['incoming_email_enabled'] = true
-    # The email address replies are sent to - Exchange does not support sub-addressing so %{key} is not used here
-    gitlab_rails['incoming_email_address'] = "incoming@exchange.example.com"
+    # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
+    # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
+    # Exchange does not support sub-addressing, so a catch-all mailbox must be used.
+    gitlab_rails['incoming_email_address'] = "incoming-%{key}@exchange.example.com"
     # Email account username
     # Typically this is the userPrincipalName (UPN)
@@ -279,15 +283,17 @@ for a real-world example of this exploit.
       idle_timeout: 60
     ```
-    Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes
-    mailbox incoming@exchange.example.com
+    Configuration for Microsoft Exchange mail server w/ IMAP enabled, assumes the
+    catch-all mailbox incoming@exchange.example.com
     ```yaml
     incoming_email:
       enabled: true
-      # The email address replies are sent to - Exchange does not support sub-addressing so %{key} is not used here
-      address: "incoming@exchange.example.com"
+      # The email address including the `%{key}` placeholder that will be replaced to reference the item being replied to.
+      # The placeholder can be omitted but if present, it must appear in the "user" part of the address (before the `@`).
+      # Exchange does not support sub-addressing, so a catch-all mailbox must be used.
+      address: "incoming-%{key}@exchange.example.com"
       # Email account username
       # Typically this is the userPrincipalName (UPN)

doc/development/emails.md

@@ -76,14 +76,32 @@ See the [Rails guides] for more info.
 ## Email namespace
-If you need to implement a new feature which requires a new email handler, follow these rules:
- - You must choose a namespace. The namespace cannot contain `/` or `+`, and cannot match `\h{16}`.
- - If your feature is related to a project, you will append the namespace **after** the project path, separated by a `+`
- - If you have different actions in the namespace, you add the actions **after** the namespace separated by a `+`. The action name cannot contain `/` or `+`, , and cannot match `\h{16}`.
- - You will register your handlers in `lib/gitlab/email/handler.rb`
-Therefore, these are the only valid formats for an email handler:
+As of GitLab 11.7, we support a new format for email handler addresses.  This was done to 
+support catch-all mailboxes.
+If you need to implement a feature which requires a new email handler, follow these rules
+for the format of the email key:
+- Actions are always at the end, separated by `-`.  For example `-issue` or `-merge-request`
+- If your feature is related to a project, the key begins with the project identifiers (project path slug
+  and project id), separated by `-`.  For example, `gitlab-org-gitlab-ce-20`
+- Additional information, such as an author's token, can be added between the project identifiers and
+  the action, separated by `-`.  For example, `gitlab-org-gitlab-ce-20-Author_Token12345678-issue`
+- You register your handlers in `lib/gitlab/email/handler.rb`
+
+Examples of valid email keys:
+
+ - `gitlab-org-gitlab-ce-20-Author_Token12345678-issue` (create a new issue)
+ - `gitlab-org-gitlab-ce-20-Author_Token12345678-merge-request` (create a new merge request)
+ - `1234567890abcdef1234567890abcdef-unsubscribe` (unsubscribe from a conversation)
+ - `1234567890abcdef1234567890abcdef` (reply to a conversation)
+
+Please note that the action `-issue-` is used in GitLab Premium as the handler for the Service Desk feature.
+
+### Legacy format
+
+Although we continue to support the older legacy format, no new features should use a legacy format.
+These are the only valid legacy formats for an email handler:
  - `path/to/project+namespace`
  - `path/to/project+namespace+action`

doc/user/project/issues/create_new_issue.md

@@ -39,34 +39,40 @@ It opens a new issue for that project labeled after its respective list.
 ## New issue via email
-*This feature needs [incoming email](../../../administration/incoming_email.md)
-to be configured by a GitLab administrator to be available for CE/EE users, and
-it's available on GitLab.com.*
-At the bottom of a project's issue page, click
-**Email a new issue to this project**, and you will find an email address
-which belongs to you. You could add this address to your contact.
-This is a private email address, generated just for you.
-**Keep it to yourself** as anyone who gets ahold of it can create issues or
-merge requests as if they were you. You can add this address to your contact
-list for easy access.
+At the bottom of a project's Issues List page, a link to **Email a new issue to this project**
+is displayed if your GitLab instance has [incoming email](../../../administration/incoming_email.md) configured.
+![Bottom of a project issues page](img/new_issue_from_email.png)
+
+When you click this link, an email address is displayed which belongs to you for creating issues in this project.
+You can save this address as a contact in your email client for easy acceess.
+CAUTION: **Caution:**
+This is a private email address, generated just for you. **Keep it to yourself**,
+as anyone who gets ahold of it can create issues or merge requests as if they
+were you. If the address is compromised, or you'd like it to be regenerated for
+any reason, click **Email a new issue to this project** again and click the reset link.
 Sending an email to this address will create a new issue on your behalf for
-this project, where the email subject becomes the issue title, and the email
-body becomes the issue description. [Markdown] and [quick actions] are
-supported.
-![Bottom of a project issues page](img/new_issue_from_email.png)
+this project, where:
+- The email subject becomes the issue title.
+- The email body becomes the issue description.
+- [Markdown](../../markdown.md) and [quick actions](../quick_actions.md) are supported.
+
+NOTE: **Note:**
+In GitLab 11.7, we updated the format of the generated email address.
+However the older format is still supported, allowing existing aliases
+or contacts to continue working._
 ## New issue via URL with prefilled fields
 You can link directly to the new issue page for a given project, with prefilled
-field values using query string parameters in a URL. This is useful for embedding 
-a URL in an external HTML page, and also certain scenarios where you want the user to 
+field values using query string parameters in a URL. This is useful for embedding
+a URL in an external HTML page, and also certain scenarios where you want the user to
 create an issue with certain fields prefilled.
-The title, description, and description template fields can be prefilled using 
+The title, description, and description template fields can be prefilled using
 this method. The description and description template fields cannot be pre-entered
 in the same URL (since a description template just populates the description field).

doc/user/project/merge_requests/index.md

@@ -169,9 +169,9 @@ those conflicts in the GitLab UI.
 ## Create new merge requests by email
-*This feature needs [incoming email](../../../administration/incoming_email.md)
+_This feature needs [incoming email](../../../administration/incoming_email.md)
 to be configured by a GitLab administrator to be available for CE/EE users, and
-it's available on GitLab.com.*
+it's available on GitLab.com._
 You can create a new merge request by sending an email to a user-specific email
 address. The address can be obtained on the merge requests page by clicking on
@@ -183,8 +183,16 @@ will be used as the merge request description. You need
 this feature. If it's not enabled to your instance, you may ask your GitLab
 administrator to do so.
+This is a private email address, generated just for you. **Keep it to yourself**
+as anyone who gets ahold of it can create issues or merge requests as if they were you.
+You can add this address to your contact list for easy access.
+
 ![Create new merge requests by email](img/create_from_email.png)
+_In GitLab 11.7, we updated the format of the generated email address.
+However the older format is still supported, allowing existing aliases
+or contacts to continue working._
+
 ### Adding patches when creating a merge request via e-mail
 > [Introduced](https://gitlab.com/gitlab-org/gitlab-ce/merge_requests/22723) in GitLab 11.5.