Loading kernel stuck
Hi,
This is not quite an issue, but asking help :) The board is bpi-r1.
I build latest version of this, also downloaded the one automatically build by CI (https://gitlab.com/db260179/openwrt-bpi-r1/builds/4709349/artifacts/download), and it stucks at:
U-Boot SPL 2016.01 (Oct 24 2016 - 23:08:56)
DRAM: 1024 MiB
CPU: 912000000Hz, AXI/AHB/APB: 3/2/2
Trying to boot from MMC
U-Boot 2016.01 (Oct 24 2016 - 23:08:56 +0300) Allwinner Technology
CPU: Allwinner A20 (SUN7I)
I2C: ready
DRAM: 1 GiB
MMC: SUNXI SD/MMC: 0
*** Warning - bad CRC, using default environment
In: serial
Out: serial
Err: serial
SCSI: SUNXI SCSI INIT
SATA link 0 timeout.
AHCI 0001.0100 32 slots 1 ports 3 Gbps 0x1 impl SATA mode
flags: ncq stag pm led clo only pmp pio slum part ccc apst
Net: eth0: ethernet@01c50000
starting USB...
USB0: USB EHCI 1.00
USB1: USB OHCI 1.0
USB2: USB EHCI 1.00
USB3: USB OHCI 1.0
scanning bus 0 for devices... 1 USB Device(s) found
scanning bus 2 for devices... 2 USB Device(s) found
Hit any key to stop autoboot: 0
switch to partitions #0, OK
mmc0 is current device
Scanning mmc 0:1...
Found U-Boot script /boot.scr
reading /boot.scr
377 bytes read in 16 ms (22.5 KiB/s)
## Executing script at 43100000
reading uImage
2446056 bytes read in 139 ms (16.8 MiB/s)
reading dtb
29567 bytes read in 28 ms (1 MiB/s)
## Booting kernel from Legacy Image at 42000000 ...
Image Name: ARM OpenWrt Linux-4.1.26
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 2445992 Bytes = 2.3 MiB
Load Address: 40008000
Entry Point: 40008000
Verifying Checksum ... OK
## Flattened Device Tree blob at 43000000
Booting using the fdt blob at 0x43000000
Loading Kernel Image ... OK
Using Device Tree in place at 43000000, end 4300a37e
Starting kernel ...
Any advice? Thanks, Cezar
LE: It seems that I powered from the wrong USB port. Mea culpa.