Merge branch 'install-guide-improvements' of /home/git/repositories/gitlab/gitlabhq

doc/install/databases.md

@@ -11,10 +11,17 @@ GitLab supports the following databases:
     # Install the database packages
     sudo apt-get install -y mysql-server mysql-client libmysqlclient-dev
+    # Pick a database root password (can be anything), type it and press enter
+    # Retype the database root password and press enter
+
     # Login to MySQL
     mysql -u root -p
-    # Create a user for GitLab. (change $password to a real password)
+    # Type the database root password
+
+    # Create a user for GitLab
+    # do not type the 'mysql>', this is part of the prompt
+    # change $password in the command below to a real password you pick
     mysql> CREATE USER 'gitlab'@'localhost' IDENTIFIED BY '$password';
     # Create the GitLab production database
@@ -29,6 +36,16 @@ GitLab supports the following databases:
     # Try connecting to the new database with the new user
     sudo -u git -H mysql -u gitlab -p -D gitlabhq_production
+    # Type the password you replaced $password with earlier
+
+    # You should now see a 'mysql>' prompt
+
+    # Quit the database session
+    mysql> \q
+
+    # You are done installing the database and can go back to the rest of the installation.
+
+
 ## PostgreSQL
     # Install the database packages

doc/install/installation.md

@@ -36,10 +36,10 @@ The GitLab installation consists of setting up the following components:
 `sudo` is not installed on Debian by default. Make sure your system is
 up-to-date and install it.
-    # run as root
-    apt-get update
-    apt-get upgrade
-    apt-get install sudo
+    # run as root!
+    apt-get update -y
+    apt-get upgrade -y
+    apt-get install sudo -y
 **Note:**
 Vim is an editor that is used here whenever there are files that need to be
@@ -55,7 +55,7 @@ Install the required packages:
 Make sure you have the right version of Python installed.
     # Install Python
-    sudo apt-get install python
+    sudo apt-get install -y python
     # Make sure that Python is 2.5+ (3.x is not supported at the moment)
     python --version
@@ -73,15 +73,17 @@ Make sure you have the right version of Python installed.
 mail server. By default, Debian is shipped with exim4 whereas Ubuntu
 does not ship with one. The recommended mail server is postfix and you can install it with:
-	sudo apt-get install postfix 
+	sudo apt-get install -y postfix 
+
+Then select 'Internet Site' and press enter to confirm the hostname.
 # 2. Ruby
-Remove old 1.8 ruby if present
-    sudo apt-get remove ruby1.8
-Download and compile it:
+Remove the old Ruby 1.8 if present
+    sudo apt-get remove -y ruby1.8
+Download Ruby and compile it:
     mkdir /tmp/ruby && cd /tmp/ruby
     curl --progress http://ftp.ruby-lang.org/pub/ruby/1.9/ruby-1.9.3-p392.tar.gz | tar xz
@@ -92,7 +94,7 @@ Download and compile it:
 Install the Bundler Gem:
-    sudo gem install bundler
+    sudo gem install bundler --no-ri --no-rdoc
 # 3. System Users
@@ -106,28 +108,25 @@ Create a `git` user for Gitlab:
 GitLab Shell is a ssh access and repository management software developed specially for GitLab.
-    # Login as git
-    sudo su git
-
     # Go to home directory
     cd /home/git
     # Clone gitlab shell
-    git clone https://github.com/gitlabhq/gitlab-shell.git
+    sudo -u git -H git clone https://github.com/gitlabhq/gitlab-shell.git
     cd gitlab-shell
     # switch to right version
-    git checkout v1.4.0
-    cp config.yml.example config.yml
+    sudo -u git -H git checkout v1.4.0
+    sudo -u git -H cp config.yml.example config.yml
     # Edit config and replace gitlab_url
     # with something like 'http://domain.com/'
-    vim config.yml
+    sudo -u git -H vim config.yml
     # Do setup
-    ./bin/install
+    sudo -u git -H ./bin/install
 # 5. Database
@@ -152,8 +151,7 @@ To setup the MySQL/PostgreSQL database and dependencies please see [`doc/install
     sudo -u git -H git checkout 5-3-stable
 **Note:**
-You can change `5-3-stable` to `master` if you want the *bleeding edge* version, but
-do so with caution!
+You can change `5-3-stable` to `master` if you want the *bleeding edge* version, but do so with caution!
 ## Configure it
@@ -205,10 +203,18 @@ Make sure to edit both `gitlab.yml` and `puma.rb` to match your setup.
     # Mysql
     sudo -u git cp config/database.yml.mysql config/database.yml
+    or
+
     # PostgreSQL
     sudo -u git cp config/database.yml.postgresql config/database.yml
-Make sure to update username/password in config/database.yml.
+    # Make sure to update username/password in config/database.yml.
+    # You only need to adapt the production settings (first part).
+    # If you followed the database guide then please do as follows:
+    # Change 'root' to 'gitlab'
+    # Change 'secure password' with the value you have given to $password
+    # You can keep the double quotes around the password
+    sudo -u git -H vim config/database.yml
 ## Install Gems
@@ -216,10 +222,10 @@ Make sure to update username/password in config/database.yml.
     sudo gem install charlock_holmes --version '0.6.9.4'
-    # For MySQL (note, the option says "without")
+    # For MySQL (note, the option says "without ... postgres")
     sudo -u git -H bundle install --deployment --without development test postgres
-    # Or for PostgreSQL
+    # Or for PostgreSQL (note, the option says "without ... mysql")
     sudo -u git -H bundle install --deployment --without development test mysql
@@ -227,6 +233,10 @@ Make sure to update username/password in config/database.yml.
     sudo -u git -H bundle exec rake gitlab:setup RAILS_ENV=production
+    # Type 'yes' to create the database.
+
+    # When done you see 'Administrator account created:'
+
 ## Install Init Script
@@ -269,7 +279,7 @@ If you can't or don't want to use Nginx as your web server, have a look at the
 [`Advanced Setup Tips`](./installation.md#advanced-setup-tips) section.
 ## Installation
-    sudo apt-get install nginx
+    sudo apt-get install -y nginx
 ## Site Configuration
@@ -280,10 +290,8 @@ Download an example site config:
 Make sure to edit the config file to match your setup:
-    # **YOUR_SERVER_FQDN** to the fully-qualified
-    # domain name of your host serving GitLab. Also, replace
-    # the 'listen' line with the following:
-    #   listen 80 default_server;         # e.g., listen 192.168.1.1:80;
+    # Change YOUR_SERVER_FQDN to the fully-qualified
+    # domain name of your host serving GitLab.
     sudo vim /etc/nginx/sites-available/gitlab
 ## Restart

lib/support/init.d/gitlab

@@ -51,7 +51,7 @@ start() {
     exit 1
   else
     if [ `whoami` = root ]; then
-      execute "rm $SOCKET_PATH/gitlab.socket"
+      execute "rm -f $SOCKET_PATH/gitlab.socket"
       execute "RAILS_ENV=production bundle exec puma $DAEMON_OPTS"
       execute "mkdir -p $PID_PATH && $START_SIDEKIQ  > /dev/null  2>&1 &"
       echo "$DESC started"

lib/support/nginx/gitlab

@@ -7,7 +7,7 @@ upstream gitlab {
 }
 server {
-  listen YOUR_SERVER_IP:80 default_server;         # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea
+  listen *:80 default_server;         # e.g., listen 192.168.1.1:80; In most cases *:80 is a good idea
   server_name YOUR_SERVER_FQDN;     # e.g., server_name source.example.com;
   server_tokens off;     # don't show the version number, a security best practice
   root /home/git/gitlab/public;